Introducing the pool care powerhouse: The Water TechniX Pool Acid! With its pH-reducing prowess and low acidity, this NON-DANGEROUS chemical is your ticket to perfectly balanced water. No dilution required—just pure pool care simplicity. It protects equipment, won’t stain surfaces, and works harmoniously with a phosphate remover and optimal chlorine levels.
Non-Dangerous: This is a non DG which is considered safe and do not pose a risk to health, the environment, or anyone’s safety.
pH rating: The non-dangerous pool acid has a pH level of 3. Its still very effective to reduce pH with a rating of 3 on the pH scale.
No dilution needed: The Water TechniX Pool Acid is ready straight out of the bottle. No dilution required, just pure pool care simplicity.
Made in Australia: All of our Water TechniX pool chemicals are proudly made in Australia. By choosing the Water TechniX homegrown hero, you’re not only treating your pool to the finest quality, but you’re also supporting local businesses.
Benefits:
- pH rating of 3
- Natural pH reducer
- Low acidic to protect equipment
- No dilution required
- Wont stain pool surfaces
- We recommend adding a phosphate remover and ensuring your chlorine levels are correct at 7.4 for the Water TechniX Pool Acid to be most effective
- Active Constituent: Organic Acid less than 10%
Product Use and Application:
- Remove cell from housing, place in a narrow, tall plastic container
- Add required amount to submerse cell
- Allow 1 – 2 hours for it to sit and soften calcium depending on the build up
- Brush calcium off cell with a plastic bristle tooth brush / plastic scraper to finish
- Salt Cell cleaner could be used multiple times, cover the container to reuse!
- Dispose of the used solution according to your local council requirements
- Clean the salt cell monthly or as required
Dosage:
- 1L Water TechniX Pool Acid (non DG) @ per 10,000L to lower pH by 1.0ppm
Or
- 250mL Water TechniX Pool Acid (non DG) @ per 40,000L to lower pH by 0.25ppm












Reviews
There are no reviews yet.